Sampling Bottomhole Sampling Sample Cylinder Surface Sampling Sampling Training   Nitrogen Booster Heating Jackets and Trolleys Hydraulic Pressure Generator Laboratory Vacuum Pump Piston Type Accumulator Production Sand Sampler	The Leutert Bottom Hole Sampler provides representative sample of well fluid which can be transferred to sample bottle without using mercury. Double end piston type hydrocarbon bottles for safe transportation of reservoir fluid to the PVT LAB. The Surface Sampling Bench SSB is used to take surface samples from the Test Separator during Production Testing of Oil and Gas Wells. Training course for PVT sampling for people with petroleum engineering background who are new to PVT bottomhole and surface sampling or want to refresh, practice and improve their skills The Leutert Booster Station is used to compress nitrogen into the sample chambers of the One Phase Samplers and Cylinders to a pressure rate above the well pressure. The Leutert electronically controlled heating jackets provide even heating of liquid and gas samplers and cylinders. The sample cylinders can easily transported anywhere in the laboratory by means of the heating jacket trolleys. The Leutert Hydraulic Pressure Generator is used to transfer oil and gas samples from a nonstandard BHS tool (RFT, FIT etc.) to a transportable cylinder or from one cylinder to another. A number of PVT laboratory operations require the use of vacuum pumps. It is essential that mechanical component connections and pressure chambers/sample cylinders are evacuated prior to introduction of hydrocarbons. The Leutert floating piston type accumulator utilizes the compressibility of nitrogen to buffer a hydraulic circuit. The Leutert Production Sand Sampler is used to collect physical samples of sand from the flow line of a well.