Pressure tapped triaxial core holder

Pressure tapped triaxial core holder

 

 

In the oil and gas industry drill core samples are collected from the formation to perform a variety of tests to learn more about its characteristics. The Leutert Pressure Tapped Triaxial Core Holder TCH allows to take in such a core samples and to perform these tests. The studies to be performed with the TCH will give answers to the gas and liquid permeability, formation damage, porosity, carbon dioxide capture and storage (CCS), relative permeability, secondary water flooding, enhanced oil recovery and steam flooding to be performed.

During the tests the core sample is contained in a sleeve inside a cylinder. Radial confining pressure is applied through the body wall, along the outer diameter of the sleeved core sample. Axial pressure may be applied indipendantly via a floating distribution piston. The operating pressure test conditions may be adjusted to the conditions of the formation from which the sample has been taken. This arrangement is useful in studying the physical characteristics of the core under various conditions.
 

Multiple inlet and outlet ports allow fluid injection through the core sample. In addition a specially designed coiled groove pattern is utilized on the end faces of the core holder’s distribution plugs which come in contact with end faces of the core sample. This is to ensure that the fluids, before entering or on exiting the core-sample, are evenly distributed on the whole face of the core-sample.
 

As a special feature of the TCH pressure ports or taps are molded into the confining pressure sleeve. These pressure ports allow to measure the pressure drop along the length of the core sample during the flooding process.
 

Leutert will custom design and manufacture core holder to fit into an existing core flooding system or other core analysis application. If desired, we will design a complete core analysis system to meet your specific needs.

 

 

Maximum working pressure: 7000 psi
Maximum working temperature 150 °C
Core sample diameter: 1.5" OD
Core sample length: adjustable between 1" and 6"
Body material: Stainless steel
Wetted parts: Hastelloy
Inlet connections: 2 x 1/8" NPT female
Outlet connection: 1 x 1/8" NPT female
Cuffs for samples: Viton
Certification: Hydrostatic T est Certificate, PED on request