Laboratory Vacuum Pump

Laboratory Vacuum Pump LVP

 

A number of PVT laboratory operations require the use of vacuum pumps. Leutert diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum.

All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE-sandwich diaphragms increase reliability and extend operating life. The pump is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensible vapors. It features slim design for space-saving installation and good vacuum performance. A manual vacuum regulator valve with dial gauge for adjustment of pumping speed and ultimate vacuum is available as accessory.

Examples of operation

  • outstanding chemical resistance and superior vapor tolerance
  • convenient, quick and simple to use due to the top mounted power switch
  • optimized vacuum even with gas ballast for continuous purge
  • whisper quiet and very low vibration
  • maintenance-free drive system and proven long diaphragm life

 

 

Number of heads / stages: 2  / 2
Inlet & outlet connection: Hose nozzle DN 8-10 mm
Pumping speed at 50/60 Hz: max. 0.44 / 0.53 cfm (0.75 / 0.9 m³/h), ISO 21360
Ultimate vacuum (absolute): 9 Torr (12 mbar) without gas ballast
15 Tor (20 mbar) with gas ballast
Permissible pressure (absolute): max. 17.5 psi (1.2 bar) at gas ballast valve
Max. back pressure (absolute): 1.1 bar
Mains voltage: 230 V AC, 50/60 Hz, 0.8/0.6 A
Rated motor power: 0.08 hp (0.06 kW)
Rated motor speed at 50/60 Hz: 1,500 / 1,800 min-1
Noise level at 50 Hz: typ. 45 dB(A) according to DIN 45635
Degree of protection: IP 40
Temperature range: operation 10 to 40°C, storage -10 to 60°C
Dimensions (L x W x H): approx. 12.3” x 4.8” x 6.7”
(312 mm x 121 mm x 170 mm)
Weight:

14.8 lbs (6.7 kg)

ATEX conformity (only 230V): II 3G IIC T3 X Internal Atm. only